Like: Socket Fusion, Butt Fusion and Saddle Fusion Type Etc.,

Details:

Polyethylene Thermoplastic Fittings for installation on IPS medium density polyethylene Pipe of SDR 10/11 produced from PE-80 resin. Fitting should be molded from PE-80 resin and should be compatible for heat fusion with any pipe manufacturer from like or similar resin.

The Polyethylene fusion fittings shall fully comply with the requirement of ASTM D-2513 and API 15LE.

The fusion fittings shall be manufactured in compliance with ASTM D-2683 (Standard specification for socket type polyethylene fittings) & ASTM D-3261 (Standard specifications for Butt Fusion Polyethylene fittings).

The measurement shall be done in accordance with ASTM D-2122.

Generally required Specifications:

The fittings should be molded form Yellow PE-80 resin for Natural Gas Applications and should be bright yellow in colour and stabilized against the effects of UV radiation, having following properties.

Melt flow index (190 deg. C/50 N) 0.2-1.3 gm/10min to ISO-440).

Density: 0.94 to 0.944 gm/cm3 (For MDPE /PE-80).